This easy & efficiency complete powder coating system is intended for use when you powdercoat large and medium parts in low volume, such as bike frames, car/truck/ parts, and all kinds of metal parts and accessories. The powder coating package also works well for batches of small parts, All equipment produced by kafan to optimize your application quality and minimize your budget.
Batch Powder Coating Equipment Package Including Manual Intelligent Powder Coating Gun, Filter Type Powder Coating Spray Booth, Electric Powder Coating Curing Oven
K2 intelligent powder coating gun use advanced technology that easily powder coats corners and complex parts, precisely set & read technical parameters thanks to the digital valve, ensure application quality., based on 10 years experienced, it requires less efforts to do powder coating jobs. We supply hopper type for single color production and box feed type for fast color change.
Reach to 98% powder recovery rate. Comes with quick-release type cartridge filter and removable bottom powder funnel section allows fast cleaning and color change. High quality galvanized materials extend to long lifespan.
Mode | KF-2315 |
Working Dimension | Width2300*Depth1500*Height1500 mm (7.5ft*4.9ft*4.9ft) |
Overall Dimension | width1640*Depth2070*Height2180 |
Power Supply | Electric |
Voltage | 220V/380V/410V, can be customized |
Nominal Power | 4kw |
Cartridge Filter | 4 pcs, quick release type , 100% polyester |
Filter Cleaning System | Pneumatic |
Air Consumption | 4000m^3/h |
Curing oven provides uniform distribution of warm air for the parts, resulting in a quality finish. Heat by electricity, energy-saving and environmental friendly. PLC controls the temperature, heating time and fan motor work, rapidly raise the required temperature in a short time, easy and efficiency.
Mode | KF-1864 |
Type | Electric Powder Coating Oven |
Working Size | width1600*Depth1400*Height1800mm (5.2ft * 4.6ft * 5.9ft) |
Outer Size | width1900*Depth1700*Height2200mm |
Power Supply | Electric/12kw |
Voltage | 380V/220V(can be customized), 3 Phase |
Motor Power | 0.75kw |
Heating Temperature | 180-250'C |
Heating Time | 15-30min |
Transportation | Trolley |
Size and special requirements of powder coating equipment can be customized to meet your actual application.